The n4ce Designer edition introduces specialist applications for geological modelling, mining, haul roads design, bore holes, rail surveys, alignments, visibility analysis,
balancing volumes,steps creation and more. Whilst it is possible to load LiDAR data in a grid format into lower editions, it is only with the Designer edition that these can be edited. These grid models can be used to create sections and simple volumes.
Height factoring takes bore hole information and models the profile of underlying strata to a ground profile. Trend surfaces can be generated from Listed points and used to predict levels elsewhere in a model. Surcharge and bulking factoring to models allow the prediction of settlements.
Building footprints floor levels may be governed by the existing ground, requiring a balancing of cut and fill. A tool calculates this level and also the batter intercepts for the cut/fill line.
Horizontal and Vertical Alignments can be designed and used to model pavements, pipelines and rail with I/O to and from MX GENIO, including Hz transitions and Vt parabolas.
Data from cant sticks and trolleys can be fed into an option for rail surveys reporting on overlaps, parallels, versines, offsets, cants etc.
Radial sections can be used in visibility analysis. A height of observer and target are provided and each section line coloured green for visible and red for hidden.
As a typical example of what can be done in n4ce, the image above was created from a rock face scan. This is difficult to model with a traditional surface modeller due to overhangs. What we did here, was to import the data in XYZ, swap the Y&Z axes and created an elevation DTM. The Y&Z axes were then flipped back, getting over the problem with overhangs!